基于FreeBSD5.4全能服务器安装

时间:2007-02-07 15:55:39 来源: 作者: 点击:次出处:技术无忧

qmail服务器安装

###################################下载软件包##################################
Part 1 - Download the Software(http://www.qmailrocks.org/downloads/qmailrocks.tar.gz)

mkdir /downloads
cd /downloads
tar zxvf qmailrocks.tar.gz

##################################安装qmail主程序##############################
Part 2 - Installing Qmail Itself

/downloads/qmailrocks/scripts/install/qmr_install_freebsd-s1.script

############qmr_install_freebsd-s1.script内容##############
#!/bin/sh

#An automation script to start the installation of qmail, ucspi-tcp and daemontools
#Specially formulated for Redhat, Fedora, RHEL and Whitebox Linux. :)

echo "Creating initial qmail directories..."
echo
sleep 2

cd /downloads/qmailrocks

mkdir -p /var/qmail

mkdir /usr/src/qmail

echo "Done!"
echo
sleep 2
echo "Creating all needed users and groups..."
echo
sleep 2

#######
#Script to add users and groups for FreeBSD

#Add all need Qmail users and groups
pw groupadd nofiles
pw useradd alias -g nofiles -d /var/qmail/alias -s /sbin/nologin
pw useradd qmaild -g nofiles -d /var/qmail -s /sbin/nologin
pw useradd qmaill -g nofiles -d /var/qmail -s /sbin/nologin
pw useradd qmailp -g nofiles -d /var/qmail -s /sbin/nologin
pw groupadd qmail
pw useradd qmailq -g qmail -d /var/qmail -s /sbin/nologin
pw useradd qmailr -g qmail -d /var/qmail -s /sbin/nologin
pw useradd qmails -g qmail -d /var/qmail -s /sbin/nologin
#Add vpopmail users/groups
pw groupadd vchkpw
pw useradd vpopmail -g vchkpw -m -d /usr/home/vpopmail -s /sbin/nologin

#######

echo "Done!"
echo
sleep 2
echo "Unpacking qmail, ucspi-tcp and daemontools..."
echo
sleep 2

cd /usr/src/qmail

tar zxvf /downloads/qmailrocks/qmail-1.03.tar.gz

tar zxvf /downloads/qmailrocks/ucspi-tcp-0.88.tar.gz

mkdir -p /package

chmod 1755 /package

cd /package

tar zxvf /downloads/qmailrocks/daemontools-0.76.tar.gz

echo "Done!"
echo
sleep 2
echo "Next, we setup special logging directories..."
echo
sleep 2

mkdir /var/log/qmail

cd /var/log/qmail

mkdir qmail-send qmail-smtpd qmail-pop3d

chown -R qmaill:wheel /var/log/qmail

chmod -R 750 /var/log/qmail

echo "Done!"
echo
sleep 2
echo "And set up the supervise script directories..."
echo
sleep 2

mkdir /var/qmail/supervise

cd /var/qmail/supervise

mkdir -p qmail-smtpd/log qmail-send/log qmail-pop3d/log

chmod +t qmail-smtpd qmail-send qmail-pop3d

echo "Setting conf-split and conf-spawn"
echo
sleep 2

echo 211 > /usr/src/qmail/qmail-1.03/conf-split

echo 255 > /usr/src/qmail/qmail-1.03/conf-spawn

echo "All steps completed!"
echo
sleep 2

######################### qmr_install_freebsd-s1.script内容#########################
###############################################################################

/downloads/qmailrocks/scripts/util/qmail_patches.script

############### qmail_patches.script内容##############
#!/bin/sh

#An automation script to start the installation of qmail, ucspi-tcp and daemontools
#Specially formulated for Redhat, Fedora, RHEL and Whitebox Linux. :)

echo "Creating initial qmail directories..."
echo
sleep 2

cd /downloads/qmailrocks

mkdir -p /var/qmail

mkdir /usr/src/qmail

echo "Done!"
echo
sleep 2
echo "Creating all needed users and groups..."
echo
sleep 2

#######
#Script to add users and groups for FreeBSD

#######

echo "Done!"
echo
sleep 2
echo "Unpacking qmail, ucspi-tcp and daemontools..."
echo
sleep 2

cd /usr/src/qmail

tar zxvf /downloads/qmailrocks/qmail-1.03.tar.gz

tar zxvf /downloads/qmailrocks/ucspi-tcp-0.88.tar.gz

mkdir -p /package

chmod 1755 /package

cd /package

tar zxvf /downloads/qmailrocks/daemontools-0.76.tar.gz

echo "Done!"
echo
sleep 2
echo "Next, we setup special logging directories..."
echo
sleep 2

mkdir /var/log/qmail

cd /var/log/qmail

mkdir qmail-send qmail-smtpd qmail-pop3d

chown -R qmaill:wheel /var/log/qmail

chmod -R 750 /var/log/qmail

echo "Done!"
echo
sleep 2
echo "And set up the supervise script directories..."
echo
sleep 2

mkdir /var/qmail/supervise

cd /var/qmail/supervise

mkdir -p qmail-smtpd/log qmail-send/log qmail-pop3d/log

chmod +t qmail-smtpd qmail-send qmail-pop3d

echo "Setting conf-split and conf-spawn"
echo
sleep 2

echo 211 > /usr/src/qmail/qmail-1.03/conf-split

echo 255 > /usr/src/qmail/qmail-1.03/conf-spawn

echo "All steps completed!"
echo
sleep 2

############################## qmail_patches.script内容###########################
###############################################################################

cd /usr/src/qmail/qmail-1.03

make man
make setup check
./config-fast mail.tjhaina.net

/usr/ports/mail/qmail
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
cd /usr/src/qmail/ucspi-tcp-0.88/
make
make setup check

/usr/ports/sysutils/ucspi-tcp
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
cd /package/admin/daemontools-0.76
package/install
reboot

/usr/ports/sysutils/daemontools
################################Part 3 - EZmlm##################################
Part 3 - EZmlm
cd /downloads/qmailrocks/
tar zxvf ezmlm-0.53-idx-0.41.tar.gz
cd ezmlm-0.53-idx-0.41
make
make setup

/usr/ports/mail/ezmlm
############################Part 4 - Qmail-Autoresponder ##########################
Part 4 - Qmail-Autoresponder
#pkg_add -r qmail-autoresponder
cd /downloads/qmailrocks
pkg_add qmail-autoresponder-0.96.1.tbz

/usr/ports/mail/qmail-autoresponder
################################art 5 - Vpopmail#################################
Part 5 - Vpopmail(I would like to install vpopmail with MySQL integration)
mkdir -p ~vpopmail/etc
mysql -u root -p
CREATE DATABASE vpopmail;
GRANT select,insert,update,delete,create,drop ON vpopmail.* TO vpopmailuser@localhost IDENTIFIED BY password;
quit
mysql -u vpopmailuser -p
quit
upload
iGENUS.mysql
mysql -u root -p < /home/chb/iGENUS.mysql
%%%%%%%%%%%%%%%%%%iGENUS.mysql%%%%%%%%%%%%%%%%%%%%%
DROP DATABASE vpopmail;
CREATE DATABASE vpopmail;
USE vpopmail;

CREATE TABLE `address` (
`id` int(11) unsigned NOT NULL auto_increment,
`pw_id` int(5) NOT NULL default 0,
`name` varchar(64) NOT NULL default ,
`email` varchar(128) NOT NULL default ,
UNIQUE KEY `id` (`id`),
KEY `pw_id` (`pw_id`)
) TYPE=MyISAM PACK_KEYS=1 ;

CREATE TABLE `admin` (
`id` int(10) unsigned NOT NULL auto_increment,
`site_id` int(10) unsigned NOT NULL default 0,
`domain` varchar(128) NOT NULL default ,
`quota` smallint(5) unsigned NOT NULL default 0,
`total` smallint(5) unsigned NOT NULL default 0,
`createtime` timestamp(14) NOT NULL,
`login` char(1) NOT NULL default ,
`cur_total` smallint(5) NOT NULL default 0,
`cur_quota` smallint(5) NOT NULL default 0,
`gid` varchar(11) NOT NULL default ,
`expiration_time` timestamp(14) NOT NULL,
`flag` int(10) unsigned NOT NULL default 0,
`maxmsg` int(10) unsigned NOT NULL default 0,
PRIMARY KEY (`id`),
UNIQUE KEY `domain` (`domain`)
) TYPE=MyISAM PACK_KEYS=1 ;

CREATE TABLE `card` (
`id` int(5) unsigned NOT NULL auto_increment,
`pw_id` int(5) unsigned NOT NULL default 0,
`LinkMan` varchar(64) NOT NULL default ,
`CompanyName` varchar(100) NOT NULL default ,
`address` varchar(255) NOT NULL default ,
`Position` varchar(32) NOT NULL default ,
`PhoneNumber` varchar(16) NOT NULL default ,
`Mobile` varchar(12) NOT NULL default ,
`Email` varchar(128) NOT NULL default ,
`Partaker` varchar(32) NOT NULL default ,
`Memo` varchar(255) NOT NULL default ,
PRIMARY KEY (`id`)
) TYPE=MyISAM ;

CREATE TABLE `lastauth` (
`user` char(32) NOT NULL default ,
`domain` char(64) NOT NULL default ,
`remote_ip` char(18) NOT NULL default ,
`timestamp` bigint(20) NOT NULL default 0,
PRIMARY KEY (`user`,`domain`)
) TYPE=MyISAM;

CREATE TABLE `logs` (
`pw_id` int(5) default 0,
`ip` varchar(15) NOT NULL default ,
`action` varchar(15) NOT NULL default ,
`time` datetime default NULL,
`content` varchar(64) NOT NULL default ,
`email` varchar(128) NOT NULL default
) TYPE=MyISAM;

CREATE TABLE `message` (
`id` int(5) unsigned NOT NULL auto_increment,
`title` varchar(255) NOT NULL default ,
`body` text NOT NULL,
`createtime` datetime NOT NULL default 0000-00-00 00:00:00,
`updatetime` datetime NOT NULL default 0000-00-00 00:00:00,
`pw_domain` varchar(64) NOT NULL default ,
UNIQUE KEY `id` (`id`)
) TYPE=MyISAM ;

CREATE TABLE `personal` (
`id` int(11) unsigned NOT NULL auto_increment,
`pw_id` int(5) NOT NULL default 0,
`truename` varchar(10) NOT NULL default ,
`fax` varchar(20) NOT NULL default ,
`telephone` varchar(15) NOT NULL default ,
`sex` int(1) NOT NULL default 0,
`year` int(4) NOT NULL default 0,
`MONTH` int(2) NOT NULL default 0,
`DAY` int(2) NOT NULL default 0,
`education` varchar(4) NOT NULL default ,
`marital` int(1) NOT NULL default 0,
`occupation` varchar(15) NOT NULL default ,
`companyname` varchar(30) NOT NULL default ,
`province` varchar(6) NOT NULL default ,
PRIMARY KEY (`id`)
) TYPE=MyISAM PACK_KEYS=1 ;

CREATE TABLE `scheduler` (
`id` int(11) unsigned NOT NULL auto_increment,
`begin_time` int(11) unsigned default NULL,
`end_time` int(11) unsigned default NULL,
`title` varchar(255) NOT NULL default ,
`body` varchar(255) NOT NULL default ,
`pw_id` int(11) unsigned NOT NULL default 0,
PRIMARY KEY (`id`)
) TYPE=MyISAM ;

CREATE TABLE `stow` (
`id` int(5) unsigned NOT NULL auto_increment,
`pw_id` int(5) unsigned NOT NULL default 0,
`Name` varchar(128) NOT NULL default ,
`http` varchar(255) NOT NULL default http://,
`memo` varchar(255) NOT NULL default ,
PRIMARY KEY (`id`)
) TYPE=MyISAM ;

create table vpopmail (
pw_id int(5) unsigned NOT NULL auto_increment,
pw_name varchar(32) NOT NULL default ,
pw_domain varchar(64) NOT NULL default ,
pw_passwd varchar(40) NOT NULL default ,
pw_uid int(11) default NULL,
pw_gid int(11) default NULL,
pw_gecos varchar(64) default NULL,
pw_dir varchar(160) default NULL,
pw_shell varchar(20) default NULL,
pw_clear_passwd varchar(16) default NULL,
createtime timestamp(14) NOT NULL,
PRIMARY KEY (pw_id),
KEY pw_name (pw_name,pw_domain) )
TYPE=MyISAM PACK_KEYS=1

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

cd /downloads/qmailrocks
tar zxvf vpopmail-5.4.9.tar.gz
cd vpopmail-5.4.9
./configure \
--disable-roaming-users \
--enable-logging=p \
--disable-ip-alias-domains \
--disable-passwd \
--enable-clear-passwd \
--disable-domain-quotas \
--enable-auth-module=mysql \
--enable-many-domains \
--enable-auth-logging \
--enable-sql-logging \
--enable-valias \
--disable-mysql-limits
make
make install-strip

chown vpopmail:vchkpw ~vpopmail/etc

echo "localhost|0|vpopmailuser|password|vpopmail" > ~vpopmail/etc/vpopmail.mysql

chown vpopmail:vchkpw ~vpopmail/etc/vpopmail.mysql

chmod 640 ~vpopmail/etc/vpopmail.mysql

/home/vpopmail/bin/vadddomain 你的域名
之后回提示输入域管理员的密码
/home/vpopmail/bin/vadduser 邮件用户@你的域名
之后回提示输入邮件用户的密码

/usr/ports/mail/vpopmail
#############################Part 6 - Vqadmin###################################
Part 6 - Vqadmin
cd /downloads/qmailrocks
tar zxvf vqadmin-2.3.6.tar.gz
cd vqadmin-2.3.6
./configure \
--enable-cgibindir=/usr/local/www/cgi-bin \
--enable-htmldir=/usr/local/www/html

make
make install-strip

Now you will need to add the following to your servers Apache configuration file (usually called httpd.conf)

ee /usr/local/etc/apache/httpd.conf
在末尾添加

deny from all
Options ExecCGI
AllowOverride AuthConfig
Order deny,allow

cd /usr/local/www/cgi-bin/vqadmin
ee .htaccess
AuthType Basic
AuthUserFile /usr/local/etc/apache/conf/vqadmin.passwd
AuthName vQadmin
require valid-user
satisfy any

mkdir /usr/local/etc/apache/conf

chown www .htaccess
chmod 644 .htaccess
htpasswd -bc /usr/local/etc/apache/conf/vqadmin.passwd admin password
chmod 644 /usr/local/etc/apache/conf/vqadmin.passwd
apachectl stop
apachectl start
http://192.168.0.205/cgi-bin/vqadmin/vqadmin.cgi

/usr/ports/mail/vqadmin
##############################Part 7 - Maildrop###################################
Part 7 - Maildrop
cd /downloads/qmailrocks
tar zxvf maildrop-1.6.3.tar.gz
cd maildrop-1.6.3
./configure \
--prefix=/usr/local \
--exec-prefix=/usr/local \
--enable-maildrop-uid=root \
--enable-maildrop-gid=vchkpw \
--enable-maildirquota
make
make install-strip
make install-man

/usr/ports/mail/maildrop
##############################Part 8 - Qmailadmin#############################
Part 8 - Qmailadmin
cd /downloads/qmailrocks
tar zxvf qmailadmin-1.2.3.tar.gz
cd qmailadmin-1.2.3
./configure \
--enable-cgibindir=/usr/local/www/cgi-bin \
--enable-htmldir=/usr/local/www/html/directory \
--enable-autoresponder-path=/usr/local/bin/qmail-autoresponder

make
make install-strip

/usr/ports/mail/qmailadmin
####################################Part 9 - Finalizing Qmail#######################
Part 9 - Finalizing Qmail
/downloads/qmailrocks/scripts/finalize/freebsd/finalize_freebsd.script

################# finalize_freebsd.script##############
#!/bin/sh

echo "This scripts will perform 3 functions:\n

1. Copy all supervise scripts to their proper locations.\n

2. Copy the qmail rc and qmailctl scripts to their proper locations and create needed symlinks.\n

3. Set all needed permisions on all supervise scripts.\n"

echo
echo "Press ENTER to proceeed"
read

echo
sleep 2

echo "Copying supervise scripts to their correct locations..."
echo
sleep 2

cp /downloads/qmailrocks/scripts/finalize/freebsd/pop3d_run /var/qmail/supervise/qmail-pop3d/run

cp /downloads/qmailrocks/scripts/finalize/freebsd/pop3d_log /var/qmail/supervise/qmail-pop3d/log/run

cp /downloads/qmailrocks/scripts/finalize/freebsd/smtpd_run /var/qmail/supervise/qmail-smtpd/run

cp /downloads/qmailrocks/scripts/finalize/freebsd/smtpd_log /var/qmail/supervise/qmail-smtpd/log/run

cp /downloads/qmailrocks/scripts/finalize/freebsd/send_run /var/qmail/supervise/qmail-send/run

cp /downloads/qmailrocks/scripts/finalize/freebsd/send_log /var/qmail/supervise/qmail-send/log/run

echo Done!
echo
sleep 2

echo "Copying rc and qmailctl scripts to proper locations..."
echo
sleep 2

cp /downloads/qmailrocks/scripts/finalize/rc /var/qmail/

cp /downloads/qmailrocks/scripts/finalize/qmailctl /var/qmail/bin/

echo Done!
echo
sleep 2

echo "Setting needed permisions..."
echo
sleep 2

chmod 755 /var/qmail/rc /var/qmail/bin/qmailctl

chmod 751 /var/qmail/supervise/qmail-pop3d/run
chmod 751 /var/qmail/supervise/qmail-pop3d/log/run

chmod 751 /var/qmail/supervise/qmail-smtpd/run
chmod 751 /var/qmail/supervise/qmail-smtpd/log/run

chmod 751 /var/qmail/supervise/qmail-send/run
chmod 751 /var/qmail/supervise/qmail-send/log/run

echo ./Maildir > /var/qmail/control/defaultdelivery

echo 255 > /var/qmail/control/concurrencyremote

chmod 644 /var/qmail/control/concurrencyremote

echo 30 > /var/qmail/control/concurrencyincoming

chmod 644 /var/qmail/control/concurrencyincoming

ln -s /var/qmail/bin/qmailctl /usr/bin

ln -s /var/qmail/supervise/qmail-send /var/qmail/supervise/qmail-smtpd /var/qmail/supervise/qmail-pop3d /service

echo "Done!"
echo
sleep 2

echo "Script Complete!"
echo

################# finalize_freebsd.script##############
#######################################################
ee /var/qmail/supervise/qmail-pop3d/run
Find "mail.example.com" and change it to your servers hostname. For example: mail.mydomain.com.

ee /var/qmail/supervise/qmail-smtpd/run
Find "mail.example.com" and change it to your servers hostname. For example: mail.mydomain.com

qmailctl stop
echo 127.:allow,RELAYCLIENT="" >> /etc/tcp.smtp

qmailctl cdb

echo b.s.d@163.com > /var/qmail/alias/.qmail-root
where "some_address" is the system user or email address you want these addresses aliased to.

echo b.s.d@163.com > /var/qmail/alias/.qmail-postmaster
where "some_address" is the system user or email address you want these addresses aliased to.

echo b.s.d@163.com > /var/qmail/alias/.qmail-mailer-daemon
where "some_address" is the system user or email address you want these addresses aliased to.

ln -s /var/qmail/alias/.qmail-root /var/qmail/alias/.qmail-anonymous
chmod 644 /var/qmail/alias/.qmail*

##########################Part 10 - Uninstalling Sendmail###########################
Part 10 - Uninstalling Sendmail
killall sendmail
mv /usr/sbin/sendmail /usr/sbin/sendmail.old
mv /usr/lib/sendmail /usr/lib/sendmail.old(this may not apply if there is no sendmail link or binary in this location)
chmod 0 /usr/lib/sendmail.old /usr/sbin/sendmail.old

Now we will need to instruct FreeBSD not to attempt to start Sendmail upon startup. This is done by make the following

modification to the /etc/rc.conf file:

Change sendmail_enable="YES" to sendmail_enable="NONE"
ln -s /var/qmail/bin/sendmail /usr/lib/sendmail
#ln -s /var/qmail/bin/sendmail /usr/sbin/sendmail

########################Part 11 - Starting up qmail#################################

Part 11 - Starting up qmail
/downloads/qmailrocks/scripts/util/qmr_inst_check
################# qmr_inst_check内容###################
#!/bin/sh

# Qmailrocks, 2003-12-05
# Ive modified Dave Sills script slightly to accomodate
# the variations between his Qmail installation and the
# Qmailrocks.org installation. The Qmailrocks version
# of this script takes into account the slightly different
# loggind directory setup and a few permissions differences.
# http://www.qmailrocks.org/downloads/scripts/qmr_inst_check

# Dave Sill, 2003-11-10
# http://lifewithqmail.org/inst_check

# set to n if youre not running a pop3 server, y if you are
CHECKPOP=y
CHECKSEND=y
QMHOME=/var/qmail
LBIN=/usr/local/bin

OK=1

if [ $# -eq 1 ]; then
if [ "$1" = "-v" ]; then
VERB=y
else
VERB=n
fi
fi

if [ ! -d $QMHOME ]; then
echo "! Couldnt find qmails home directory, $QMHOME!"
else
if [ "$VERB" = y ]; then
echo "$QMHOME exists"
fi
for i in alias bin boot control doc man queue supervise users; do
if [ ! -d $QMHOME/$i ]; then
echo "! Couldnt find $QMHOME/$i!"
OK=0
elif [ "$VERB" = y ]; then
echo "$QMHOME/$i exists"
fi
done

if [ ! -f $QMHOME/rc ]; then
echo "! $QMHOME/rc is missing"
OK=0
elif [ ! -x $QMHOME/rc ]; then
echo "! $QMHOME/rc is not executable"
echo "...try: chmod 755 $QMHOME/rc"
OK=0
elif [ `head -1 $QMHOME/rc|cat -vet` != #!/bin/sh$ ]; then
echo "! $QMHOME/rc has bad magic cookie"
echo "...try: dos2unix $QMHOME/rc"
OK=0
elif [ "$VERB" = y ]; then
echo "$QMHOME/rc is executable and has a valid magic cookie"
fi
fi

for i in alias qmaild qmaill qmailp qmailq qmailr qmails; do
grep "^$i:" /etc/passwd >/dev/null
if [ $? -ne 0 ]; then
echo "! Couldnt find $i user in /etc/passwd"
OK=0
elif [ "$VERB" = y ]; then
echo "$i user exists"
fi
done

for i in qmail nofiles; do
grep "^$i:" /etc/group >/dev/null
if [ $? -ne 0 ]; then
echo "! Couldnt find $i group in /etc/group"
OK=0
elif [ "$VERB" = y ]; then
echo "$i group exists"
fi
done

for i in tcprules tcpserver; do
if [ ! -x $LBIN/$i ]; then
echo "! Couldnt find $LBIN/$i from ucspi-tcp"
OK=0
elif [ "$VERB" = y ]; then
echo "$i from ucspi-tcp is installed"
fi
done

for i in multilog softlimit setuidgid supervise svok svscan tai64nlocal; do
if [ ! -x $LBIN/$i ]; then
echo "! Couldnt find $LBIN/$i from daemontools"
OK=0
elif [ "$VERB" = y ]; then
echo "$i from daemontools is installed"
fi
done

if [ ! -d /service ]; then
echo "! /service directory is missing"
OK=0
elif [ "$VERB" = y ]; then
echo "/service directory exists"
fi

if [ -f /etc/inittab ]; then
grep "^SV" /etc/inittab >/dev/null
if [ $? -ne 0 ]; then
echo "! Couldnt find SV entry in inittab"
OK=0
elif [ "$VERB" = y ]; then
echo "svscan /service is configured to run via /etc/inittab"
fi
PS="ps -ef"
else
grep "svscanboot" /etc/rc.local >/dev/null
if [ $? -ne 0 ]; then
echo "! Couldnt find csh -cf /command/svscanboot & in /etc/rc.local"
OK=0
elif [ "$VERB" = y ]; then
echo "/command/svscanboot is configured to run via /etc/rc.local"
fi
PS="ps -waux"
fi

SVRUN=`$PS | grep "svscan /service" | grep -v grep`
if [ -z "$SVRUN" ]; then
echo "! svscan /service doesnt seem to be running"
OK=0
elif [ "$VERB" = y ]; then
echo "svscan /service is running"
fi

if [ ! -f $QMHOME/control/defaultdelivery ]; then
echo "! Couldnt find $QMHOME/control/defaultdelivery"
OK=0
elif [ ! -s $QMHOME/control/defaultdelivery ]; then
echo "! $QMHOME/control/defaultdelivery is empty"
OK=0
elif [ "$VERB" = y ]; then
echo "$QMHOME/control/defaultdelivery looks OK"
fi

if [ ! -f $QMHOME/bin/qmailctl ]; then
echo "! $QMHOME/bin/qmailctl is missing"
OK=0
elif [ ! -s $QMHOME/bin/qmailctl ]; then
echo "! $QMHOME/bin/qmailctl is empty"
OK=0
elif [ `head -1 $QMHOME/bin/qmailctl|cat -vet` != #!/bin/sh$ ]; then
echo "! $QMHOME/bin/qmailctl has bad magic cookie"
echo "...try: dos2unix $QMHOME/bin/qmailctl"
OK=0
elif [ ! -x $QMHOME/bin/qmailctl ]; then
echo "! $QMHOME/bin/qmailctl is not executable"
echo "...try: chmod 755 $QMHOME/bin/qmailctl"
OK=0
elif [ "$VERB" = y ]; then
echo "$QMHOME/bin/qmailctl looks OK"
fi
if [ ! -L /usr/bin/qmailctl ]; then
echo "! /usr/bin/qmailctl is missing"
echo "...try: ln -s $QMHOME/bin/qmailctl /usr/bin"
OK=0
elif [ "$VERB" = y ]; then
echo "/usr/bin/qmailctl exists"
fi

SVCDIRS="qmail-send qmail-send/log qmail-smtpd qmail-smtpd/log"
if [ "$CHECKPOP" = "y" ]; then
SVCDIRS="$SVCDIRS qmail-pop3d qmail-pop3d/log"
fi
for i in $SVCDIRS; do
if [ ! -f $QMHOME/supervise/$i/run ]; then
echo "! $QMHOME/supervise/$i/run file is missing"
OK=0
elif [ `head -1 $QMHOME/supervise/$i/run|cat -vet` != #!/bin/sh$ ]; then
echo "! $QMHOME/supervise/$i/run has bad magic cookie"
echo "...try: dos2unix $QMHOME/supervise/$i/run"
OK=0
elif [ ! -x $QMHOME/supervise/$i/run ]; then
echo "! $QMHOME/supervise/$i/run file is not executable"
OK=0
elif [ "$VERB" = y ]; then
echo "$QMHOME/supervise/$i/run looks OK"
fi
done

if [ ! -f $QMHOME/control/concurrencyincoming ]; then
echo "! $QMHOME/control/concurrencyincoming is missing"
echo "...try: echo 30 >$QMHOME/control/concurrencyincoming"
OK=0
elif [ "$VERB" = y ]; then
echo "$QMHOME/control/concurrencyincoming looks OK"
fi

LOGDIRS="/var/log/qmail /var/log/qmail/qmail-smtpd"
if [ "$CHECKPOP" = "y" ]; then
LOGDIRS="$LOGDIRS /var/log/qmail/qmail-pop3d"
fi
if [ "$CHECKSEND" = "y" ]; then
LOGDIRS="$LOGDIRS /var/log/qmail/qmail-send"
fi
for i in $LOGDIRS; do
if [ ! -d $i ]; then
echo "! $i is missing"
echo "...try: mkdir -p $i"
OK=0
elif [ "`ls -ld $i|awk {print $3}`" != "qmaill" ]; then
echo "! $i has wrong owner, should be qmaill"
echo "...try: chown qmaill $i"
OK=0
elif [ "`ls -ld $i|awk {print $1}`" != "drwxr-x---" ]; then
echo "! $i has wrong mode, should be 750"
echo "...try: chmod 750 $i"
OK=0
elif [ "$VERB" = y ]; then
echo "$i looks OK"
fi
done

SVCLINKS="/service/qmail-send /service/qmail-smtpd"
if [ "$CHECKPOP" = "y" ]; then
SVCLINKS="$SVCLINKS /service/qmail-pop3d"
fi
for i in $SVCLINKS; do
if [ ! -L $i ]; then
echo "! $i is missing"
echo "...try: ln -s $QMHOME$i $i"
OK=0
elif [ "$VERB" = y ]; then
echo "$i exists"
fi
done

if [ ! -f /etc/tcp.smtp ]; then
echo "! /etc/tcp.smtp is missing"
echo "...try: echo 127.:allow,RELAYCLIENT=\"\" >>/etc/tcp.smtp"
OK=0
elif [ "$VERB" = y ]; then
echo "/etc/tcp.smtp exists"
fi

if [ ! -f /etc/tcp.smtp.cdb ]; then
echo "! /etc/tcp.smtp.cdb is missing"
echo "...try: $QMHOME/bin/qmailctl cdb"
OK=0
elif [ "$VERB" = y ]; then
echo "/etc/tcp.smtp.cdb exists"
fi

AHOME=`grep "^alias:" /etc/passwd | awk -F: {print $6}`
if [ -z "$AHOME" ]; then
echo "! Couldnt find user aliass home directory"
OK=0
else
for i in root postmaster mailer-daemon; do
if [ ! -f $AHOME/.qmail-$i ]; then
echo "! Alias for $i is missing"
echo "...try: echo me >$AHOME/.qmail-$i"
OK=0
elif [ "$VERB" = y ]; then
echo "$i alias exists"
fi
done
fi

if netstat -a | grep smtp | grep -i listen >/dev/null; then
if $PS | grep sendmail | grep -v grep >/dev/null; then
echo "! Sendmail is still running"
echo "...try: $RCDIR/init.d/sendmail stop"
OK=0
elif $LBIN/svok /service/qmail-smtpd; then
if [ "$VERB" = y ]; then
echo "/service/qmail-smtpd is running"
fi
else
echo "! Something is listening on port 25 (not tcpserver/qmail-smtpd)"
echo "...try: disabling current MTA"
OK=0
fi
fi

if [ "$CHECKPOP" = "y" ]; then
if netstat -a | grep pop | grep -i listen >/dev/null; then
if $LBIN/svok /service/qmail-pop3d; then
if [ "$VERB" = y ]; then
echo "/service/qmail-pop3d is running"
fi
else
echo "! Something is listening on port 110 (not tcpserver/qmail-pop3d)"
echo "...try: disabling other POP server"
OK=0
fi
fi
fi

for i in /usr/lib/sendmail /usr/sbin/sendmail; do
if [ -f $i -a ! -L $i ]; then
echo "! $i is a file, should be a link"
echo "...try: uninstalling current MTA or: mv $i $i.old; ln -s $QMHOME/bin/sendmail $i"
OK=0
elif [ ! -f $i ];then
echo "! $i is missing"
echo "...try: ln -s $QMHOME/bin/sendmail $i"
OK=0
elif [ "$VERB" = y ]; then
echo "$i exists"
fi
done

if [ $OK -eq 1 ]; then
echo "Congratulations, your Qmailrocks.org Qmail installation looks good!"
elif [ "$VERB" = y ]; then
echo "! Potential problems were found with your LWQ installation"
fi

################# qmr_inst_check内容###################
#######################################################
qmailctl stop
qmailctl start
telnet localhost 110

you should see something like this:

Trying 192.168.1.10...
Connected to 192.168.1.10.
Escape character is ^].
+OK <16658.1054485137@yourserver.com>
user postmaster@mydomain.com (enter your username here. remember to use the full e-mail address)
+OK
pass your_password
+OK
quit
+OK
Connection closed by foreign host.

This is the sign of a successfull POP connection to the server!

Now try sending mail to that same user from another location. Telnet to 110 again and run the "list" command and you should

see the message that your send...
telnet localhost 110

Trying 192.168.1.10...
Connected to 192.168.1.10.
Escape character is ^].
+OK <16658.1054485137@yourserver.comt>
user postmaster@mydomain.com (again, remember to log in with the full email address of the user)
+OK
pass your_password
+OK
list
+OK
1 323 (theres your message!)
.
quit
+OK
Connection closed by foreign host.

########################Part 12 - Installing Courier IMAP & IMAP SSL################
Part 12 - Installing Courier IMAP & IMAP SSL
cd /downloads/qmailrocks/
/usr/bin/bunzip2 courier-imap-3.0.8.tar.bz2 (Note: some systems may use bunzip2 instead of bunzip)
#bunzip courier-imap-3.0.8.tar.bz2
tar xvf courier-imap-3.0.8.tar
cd courier-imap-3.0.8
./configure \
--prefix=/usr/local \
--exec-prefix=/usr/local \
--without-authdaemon \
--with-authvchkpw \
--without-authldap \
--disable-root-check \
--with-ssl
make
make install-strip
cd /usr/local/etc
cp imapd.dist imapd
cp imapd-ssl.dist imapd-ssl
/usr/local/sbin/mkimapdcert
ee imapd-ssl
#make sure IMAPDSSLSTART=YES

cp /usr/local/libexec/imapd.rc /usr/local/etc/rc.d/imap.sh
cp /usr/local/libexec/imapd-ssl.rc /usr/local/etc/rc.d/imaps.sh
/usr/local/etc/rc.d/imap.sh start
/usr/local/etc/rc.d/imaps.sh start

telnet localhost 143

Trying 192.168.1.10...
Connected to 192.168.1.10.
Escape character is ^].
* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE STARTTLS]

Courier-IMAP ready. Copyright 1998-2003 Double Precision, Inc. See COPYING for distribution information.
a login postmaster@mydomain.com my_password
a OK LOGIN Ok. (successful login!)
a logout (logs you out)
* BYE Courier-IMAP server shutting down
a OK LOGOUT completed
Connection closed by foreign host.

make
make install-->

#########################Part 14 - Clam Antivirus & Spamassassin####################
Part 14 - Clam Antivirus & Spamassassin

安装Clamav

cd /usr/ports/security/clamav
make
make install
make clean
注：选中CURL
reboot
测试
/usr/local/bin/clamscan -r -i /usr/local/www/data
----------- SCAN SUMMARY -----------
Known viruses: 32358
Scanned directories: 47
Scanned files: 866
Infected files: 0
Data scanned: 10.32 MB
I/O buffer size: 131072 bytes
Time: 41.750 sec (0 m 41 s)

升级病毒库
/usr/local/bin/freshclam -l /var/log/clamav/clam-update.log

ClamAV update process started at Fri May 6 00:12:24 2005
WARNING: Your ClamAV installation is OUTDATED - please update immediately!
WARNING: Local version: 0.83 Recommended version: 0.84
Downloading main.cvd [*]
main.cvd updated (version: 31, sigs: 33079, f-level: 4, builder: tkojm)
Downloading daily.cvd [*]
daily.cvd updated (version: 871, sigs: 1178, f-level: 4, builder: ccordes)
Database updated (34257 signatures) from database.clamav.net (IP: 61.8.0.16)
Clamd successfully notified about the update.